abrading

英 [əˈbreɪdɪŋ]

美 [əˈbreɪdɪŋ]

v.  磨损(岩石等); 擦伤(皮肤等)
abrade的现在分词

化学

柯林斯词典

• VERB 磨损；磨蚀；擦伤
  Toabradesomething means to scrape or wear down its surface by rubbing it.
  1. My skin was abraded and very tender.
     我擦破皮了，一碰就疼。

双语例句

• Reduce to small pieces or particles by pounding or abrading.
  通过重击或磨损使变成小的碎片或颗粒。
• Development of NC System on Graphite Electrode Abrading Tool
  整体石墨电极研磨成形机数控系统开发与研究
• Study ON The Magnetic Electrolytic Abrading Process And Machine In Curved Container
  曲面容器磁力电解研磨工艺及机械的研究
• The influence of the pretreatment methods by abrading substrate surface, plasma erosion, removing cobalt by corrosion, intermediate layer and forming stable compounds on substrate surface on CVD diamond films was stated.
  分析了表面研磨法、等离子刻蚀法、浸蚀除钴法、沉积中间层法在衬底表面形成稳定化合物等预处理对CVD金刚石薄膜沉积的影响。
• Cluth's abrading is already an old topic, but in the praxis how cut to abrade, but is what everyone at pay attention to, today we to talk about once.
  离合器的磨损已经是老话题了，但是在使用中如何减少磨损，却是大家都在关注的，今天我们来讨论一下。
• Applications of auxiliary processes, in terms of abrading, polishing, wax finishing, sealant coating, paint spraying, wax spraying and et al, in coating automobiles are reviewed.
  综述了打磨、抛光、打蜡、涂密封胶、喷涂涂料、涂保护蜡等辅助工序在汽车涂装中的应用。
• Pointing to the real time monitoring and control of small circular vibration of the main vibration platform in graphite electrode abrading machine, the vibration of the main vibration platform in X, Y axis is detected by a eddy transducer with two probes.
  针对石墨电极研磨机主振台微圆周振动轨迹实时监测与控制的要求，采用了双测头电涡流传感器分别检测主振台X、Y向的振动。
• It acts as a geologic rasp, scratching, gouging and generally abrading the surfaces over which the glacier rides.
  它就像一把地质锉刀一样通过刮、刨等作用来磨损冰川流过的表面。
• Compared with traditional abrasive techniques, ultrasonic abrasive is high efficiency, and has small cutting force when abrading, and could achieve high surface quality after abrading.
  与传统的研磨技术相比，超声波研磨效率高，研磨时磨粒的切削力小，研磨后表面质量高。
• The results showed that after being processed on numerical control lathe, grade polished by SiC micro-powder and diamond abrading agent and size corrected by special tools, the Al_2O_3 ceramic hip joint femur ball has good surface degree of finish and it matches well with the femur handle.
  结果表明，通过数控车床车削、SiC超细粉和金刚石研磨膏分级抛光并用特制工具修正其尺寸，可以得到具有一定表面光洁度并与股骨柄配合良好的Al2O3陶瓷髋关节股骨头假体。